1 in the data, data are in accordance with the corresponding GB (GB) test method for the determination of.
2 this information is based on the accumulation of practical long-term research and I plant products and preparation, for reference. Because there are many factors in the courseof processing and applications, so users need to test in use, the data in the law also does not guarantee some performance of products are suitable for a particular purpose, and reserve the right to make changes to the technical parameters. If the user needs the product or the user to solve the technical problems are not included in this information, please contact with our company, our company will provide services according to user requirements.
3 making resin using the environment temperature is not lower than 15 ¡æ, relative humidity should be less than 80%.
4 making the curing agent the maximum amount of not more than 6%, accelerator not less than 0.5%, otherwise it will affect the quality of the products.
5 making resin after curing, curing processing must be carried out, in order to completely cure. At room temperature curing takes longer time, heating can shorten the curing time, curing of general aging treatment after 24 hours.
6 making handling may not be curing agent and accelerator package put together, in order to avoid accidental impact dynamic impact.
7 making resin and accessories shall be stored at low temperature and away from light. Usually in 20 ¡æ storage period of six months, 30 ¡æ storage period of three months.
8 making shipment processing according to the relevant provisions of the state.
|
